How to use turbocharger correctly:

1. Avoid the engine idling for a long time, or the low oil pressure during idling will cause early wear of rotor shaft, bearing, seal ring and other components.

2. Frequently check whether the turbocharger seal ring is invalid. If the turbine face seal fails, the exhaust gas will enter the engine lubrication system through the seal ring. After a long period of time, the engine oil will fail prematurely.

3. If high-quality oil is used, the amount of air entering the combustion chamber will greatly increase in the volume of the engine combustion chamber under the action of the turbocharger. Under the same condition, it is equivalent to increasing the compression ratio, which greatly improves the working strength of the engine. Turbocharged engine has high machining accuracy and strict assembly process. Therefore, when using the engine oil of the turbocharged engine, it is necessary to use qualified engine oil, which has good wear resistance and high temperature resistance, and is easy to form a high-strength oil film.

4. Replace the engine oil regularly, and the rotor shaft and bearing of the turbocharger are very accurate. If the oil is full of impurities, when it is brought into the supercharger, it will accelerate the slight wear of the bearing, and the rotor shaft and bearing will be damaged after a long time. Therefore, the oil must be changed regularly.

5. Turbocharger rotor bearing has high accuracy and strict requirements on working environment during maintenance and installation. Therefore, when the turbocharger fails or is damaged, it should be repaired at a professional service station.